EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Demand Controller is a hugely successful solar controller designed for off-grid solar devices. According to multiphase synchronous rectification know-how, it makes sure optimized energy conversion and process steadiness for a wide array of photovoltaic (PV) apps.
Crucial Attributes on the EPEVER Tracer AN Sequence Controller
The Tracer AN series makes use of EPEVER Photo voltaic Charge Controller technological know-how for remarkable solar Vitality harvesting. Vital functions contain:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Superior MPPT Algorithm with >ninety nine% performance.
Twin-Stage Charging for enhanced battery lifetime.
LCD Display with actual-time information monitoring.
A number of Load Manage Modes such as manual and timer.
In depth Electronic Protections towards overcharging, more than-discharging, limited circuits, and reverse polarity.
Stage-by-Phase Guideline to Starting the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Guarantee all parts are incorporated: Tracer AN unit, temperature sensor, communication cables, and consumer handbook.
Validate the design quantity and voltage ratings match your solar panel and battery requirements.
2. Mounting the Cost Controller
Pick a effectively-ventilated, dry spot close to the battery financial institution.
Protected the Tracer AN controller using the presented mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Always stick to proper protection protocols and make sure the technique is powered off in advance of connecting components.
Move 1: Link the battery terminals for the demand controller (good to good, detrimental to negative).
Move two: Link the photo voltaic panel array towards the PV enter terminals.
Action 3: Connect the load terminals if utilizing a immediate load relationship.
Move four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Power around the controller by connecting the battery to start with.
Utilize the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Management.
5. Checking and Facts Logging
The Tracer AN Series supports authentic-time checking utilizing the MT50 distant meter.
Knowledge is often logged via the RS485 conversation port applying software for instance Solar Station Personal computer.
Remote monitoring is possible Along with the EPEVER WiFi module.
6. Troubleshooting Prevalent Troubles
Issue one: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Safety
Validate the photo voltaic array’s voltage score.
Alter system parameters if important.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lessened Vitality losses throughout conversion.
Enhanced Reliability: Steady efficiency below variable hundreds.
For a longer period Battery Daily life: Constant and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how More info is definitely an exceptional choice for optimizing solar energy technology and increasing battery lifestyle. By following the above mentioned set up manual, end users can assure optimum effectiveness and method longevity.